arcelik K60365, Руководство по обслуживанию

Страница: 32 / 62

30
9.3 Disassembly of Run Capacitor
It is snapped on the rear foot part by means of tabs. When it is disassembled, tabs of the
relevant part is stretched from the bottom part, and the part is pulled to the above, and disengaged
from tabs.
9.4 Removing the Filter Box
Filter piece is attached on the rear foot by means of a screw at one side and a tab on the
other. To remove it, the screw is unscrewed and then the piece is released from the tab connection.
The relevant piece is serviced together with the supply cable.
9.5 Removing the Thermal Relay Group
The relay part which is one of the electrical components is contained in the terminal group.
In order to dismount the relevant part, terminal box found on the compressor is removed (2),
grounding cable on the rear foot is loosened by a Phillips screwdriver (3). All sockets on the
terminal group are removed (4). Screw connections will be unscrewed and the part can be taken out
as shown in the picture (5).