Instruct
i
ons for safety and env
i
ronment
4 / 33EN
Refrigerator / User Manual
A
1.3 - Electrical safety
t
The product must be unplugged during
installation, maintenance, cleaning,
repairing and moving procedures.
t
If the power cable is damaged, it must
be replaced by a qualified person spe-
cified by the manufacturer, authorised
service agent or importer in order to
avoid potential dangers.
t
Do not squeeze the power cable under
or behind the product. Do not place
heavy objects on the power cable.
Power cable must not be bent excessi-
vely, pinched or get in contact with any
heat source.
t
Do not use extension cords, multi-
sockets or adapters to operate the
product.
t
Portable multi-sockets or portable
power sources can overheat and cause
fire. Therefore, do not keep any multi-
sockets behind or near the product.
t
Plug must be easily accessible. If this
is not possible, the electrical installa-
tion to which the product is connected
must contain a device (such as a fuse,
switch, circuit breaker, etc.) which
conforms to the electrical regulations
and disconnects all poles from the
grid.
t
Do not touch the power plug with wet
hands.
t
Remove the plug from the socket by
gripping the plug and not the cable.
A
1.4 - Transportation safety
t
Product is heavy; do not move it alone.
t
Do not hold its door when moving the
product.
t
Pay attention not to damage the cooling
system or the piping during transportati-
on. If the piping is damaged, do not ope-
rate the product and call the authorised
service agent.
A
1.5 - Installation safety
t
Call the authorised service agent for ins-
tallation of the product. To make the pro-
duct ready for use, check the information
in the user manual to make sure that the
electricity and water installations are
suitable. If they are not, call a qualified
electrician and plumber to have the ne-
cessary arrangements made. Otherwise,
there is the risk of electric shock, fire,
problems with the product, or injury!
t
Prior to installation, check if the product
has any defects on it. If the product is
damaged, do not have it installed.
t
Place the product on a clean, flat and so-
lid surface and balance it with adjustable
feet. Otherwise, the product may tip over
and cause injuries.
t
The installation location must be dry and
well ventilated. Do not place carpets,
rugs or similar covers under the product.
Insufficient ventilation causes the risk
of fire!
t
Do not cover or block the ventilation
openings. Otherwise, power consump-
tion increases and your product may get
damaged.
t
Product must not be connected to supply
systems such as solar power supplies.
Otherwise, your product may get dama-
ged due to sudden voltage changes!
t
The more refrigerant a refrigerator con-
tains, the larger the installation location
must be. If the installation location is
too small, flammable refrigerant and air