5692 FRESCA DRIVE, LA PALMA, CA 90623 | 800.585.5957 | ARCADIACONTRACT.COM
CO-OP ASSEMBLY INSTRUCTIONS – MODEL 6523 & 6523-65TL
Hardware Included:
[A] 5/16-18 x 2” hex bolt (18)
[B] Washer (18)
[C] ¼-20 x .75” decorative screw (4)
[D] ¼-20 x 2” hex bolt (4)
[E] 2” wood screws (8)
IMPORTANT – HARDWARE IS SPECIFIC FOR THE ASSEMBLY OF EACH COMPONENT. MAKE SURE THE
CORRECT ITEMS ARE USED AS DIRECTED AND IDENTIFIED BELOW.
Step 1: Place the seating unit on top of the plinth base and properly secure using (6) 5/16-18 x 2” hex bolts
[A], though the inside of the seating unit, into pre-inserted t-nuts (Figure A).
Step 2: Attach the back panel to the seat by placing it on top of the plinth base and properly securing with (8)
5/16-18 x 2” hex bolts [A] and washers [B], into the pre-inserted t-nuts (Figure B).
continued next page
FIGURE A
FIGURE B
[A]
[B]
[C]
[D] [E]
[A] 5/16-18 x 2” hex bolts, 6
[E] Wood screws, 6
[A] 5/16-18 x 2” hex bolts, 8
[E] Wood screws, 8
