BAG 01
02
01
PAGE-01
PAGE-21
PAGE-32&34
PAGE-36
PAGE-26
BULKHEAD ALIGNMENT PROCESS
PAGE-03
PAGE-06
PAGE-11&19
PAGE-13
ADDITIONAL INSTRUCTION
ADDITIONAL INSTRUCTION
R121025
R122101
R121025 R12 Center Pulley 20T
R122101 R12 Center Pulley Hub-Alu
R102020
R123001
R805101
R121030
R103050
(0.3mm)
R103050
(0.3mm)
R121030
R105104
R105205
R106001
R103051
R121030
The aluminum eccentric hub provide more precise
and minimize gap when adjust belt tension.
R122017
R12 Eccentric Hub-Alu (4)
Option Parts (Not Included)
CORRECT ITEM NUMBER
NOTICE
OPTION PARTS
R129004
R12 ATS SYSTEM (Not Included)
CORRECT ITEM NUMBER
NOTICE
Step 1
Release bulknead screw
Step 2
Assemble all upperdeck screw and tight
Step 3
Tight the bulknead screw evenly
Step 3
Tight the bulknead screw evenly
Recommend length for initial setup
NOTICE
Option Parts (Not Included)
(Long)
(Short)
(Short)
(Long)
Length 15.2mm X 2 Set
Front Link
Rear Link
Length 14.2mm X 2 Set
17mm
R113028
R113029
R103028
4x11x0.25mm Shims (8)
R103029
4x11x0.5mm Shims (8)
Option Parts (Not Included)
The track width can be increased by adding
R113028 (0.25mm) and R113029 (0.5mm).
2.5mm Hex hole inside
for tight the axle
To make sure the bulkhead become ture aligned please do
below process when assemble the bulkhead.
Left Side
Right Side
Left Side
Right Side
FRONT
REAR
R103050
(0.3mm)
R103050
(0.3mm)
