Arbor Technology FPC-8100 Series Скачать руководство пользователя страница 74

Страница: 74 / 105

- 62 -

BIOS

5.2.1. CPU Configuration

The features settings are:

Setting

Description

Active Processor Cores

Number of cores to enable in each processor package.

►

Options:

All

(default) and

Hyper-Threading

Enabled

(default) for Windows XP and Linux (OS

optimized for Hyper-Threading Technology) and

Disabled

for other OS (OS not optimized or Hyper-Threading

Technology). When disabled only one thread per enabled

core is enabled.

Intel (VMX) Virtualization

Technology

When enabled, a VMM can utilize the additional hardware

capabilities provided by Vanderpool Technology.

►

Options:

Enabled

(default) or

Disabled

Intel (R) Speed Step (tm)

Enable

(default)/

Disable

Intel SpeedStep. Allows more

than two frequency ranges to be supported.

Turbo Mode

Only available when Intel Speed Step is

Enabled

Enable

Disable

(default) Turbo Mode (requires

EMTTM enabled, unless max turbo ratio is bigger than

16 - SKL AO W/A.

Содержание FPC-8100 Series










































































































Результаты поиска

Содержание FPC-8100 Series

Отзывы:

Бренды по названию

Популярные бренды

Arbor Technology FPC-8100 Series, Руководство пользователя

Результаты поиска

Содержание FPC-8100 Series

Отзывы:

Бренды по названию

Популярные бренды