Arbor Technology EmETXe-i91M0 Скачать руководство пользователя страница 7

Страница: 7 / 68

- v -

Warning

Single Board Computers and their components contain very delicate

Integrated Circuits (IC). To protect the Single Board Computer and its

components against damage from static electricity, you should always follow

the following precautions when handling it :
1. Disconnect your Single Board Computer from the power source when you

want to work on the inside.
2. Hold the board by the edges and try not to touch the IC chips, leads or cir-

cuitry.
3. Use a grounded wrist strap when handling computer components.
4. Place components on a grounded antistatic pad or on the bag that comes

with the Single Board Computer, whenever components are separated from

the system.

Replacing the Lithium Battery

Incorrect replacement of the lithium battery may lead to a risk of explosion.
The lithium battery must be replaced with an identical battery or a battery type

recommended by the manufacturer.
Do not throw lithium batteries into the trash-can. It must be disposed of in

accordance with local regulations concerning special waste.

Technical Support

If you have any technical difficulties, please contact our website at:

https://www.arbor-technology.com

Preface

Содержание EmETXe-i91M0





































































Результаты поиска

Содержание EmETXe-i91M0

Отзывы:

Arbor Technology EmETXe-i91M0, Руководство пользователя, Страница: 7 / 68

Результаты поиска

Содержание EmETXe-i91M0

Отзывы: