Arbiter Systems 120A, Руководство пользователя

Страница: 25 / 35

To be able to use these extra bits of information, protective relays, RTU’s and other equipment receiving the time
code must be able to decode them. Consult your equipment manual to determine if the IEEE C37.118.1 feature
should be turned ON in the clock. To view details of the IEEE Std C37.118.1, please check with the IEEE.
The Model 120A supports the unmodulated (DC level shift) versions of the IRIG-B standard B000 and B003, B004
(RCC 200-16) in both local or UTC time. The control functions of B000 and B004 follow IEEE C37.118 timing
specifications.
7.2 Serial Commands
The CONFIG PORT and the RS-232 port have equal functionality except firmware updates must use the CONFIG
PORT. To start the configuration process, make a serial connection using a terminal program with the following
default settings:
•
Baud Rate: 115200
•
Data Bits: 8
•
Stop Bits: 1
•
Parity: N
Default Username: Administrator
Default Password: P4ssw_rd
Administration Commands (Admin)
Function Command Action / Response
List Users users Returns current list and roles of users
Add User add “<username>” “<password>” <role>
{<pw_perm>}
Where:
“<username>” = Min 8 char,
alphanumeric, starts with alpha
“<password>” = Min 8 char, At least 1
upper/lower/number/non-
alphanumeric
<role> = 0-Rd Only, 1-User Config,
2-User Admin, 3-Admin Config
<pw_perm> = 0-Can't change password,
1-Can change password (optional: 0
default)
Quotes are required around the
username and password.
Delete User delete “<username>” Removes the listed user and roles.
Quotes are required around the
username.
Set Password password “<newpassword>” Min 8 char, At least 1 of each
upper/lower/number/non-
alphanumeric. Quotes are required
around the password.