Arbiter Systems 1200B, Руководство по эксплуатации

Страница: 117 / 218

11.2 Standard Command Set 99
11.2.9 Date and Time Commands
Set Receiver Time
Command: yyyy:MM:dd:hh:mmTS
Sets the receiver to UTC time only available on initial power up and not locked to the GNSS .
Format: yyyy = year
MM = month
dd
= day
hh = hour
mm = minute
Response: < CR >< LF >
Return Local Date, Return UTC Date
Command: DL, DU
Returns the current date in local time or UTC.
Format: DL = local time
DU = UTC
Response: ddmmmyyyy < CR >< LF >
Where: dd = day of month
mmm = month, three character abbreviation
yyyy
= year
Return Local Time, Return UTC Time
Command: TL, TU
Returns the current time in local time or UTC.
Format: TL = local time
TU = UTC
Response: ddd:hh:mm:ss < CR >< LF >
Where: ddd = Julian day of year
hh = hour
mm = minute
ss
= second
11.2.10 Programmable Pulse Output Commands
Pulse Width, Seconds-Per-Pulse
Command: nnn.nnPW
Configures the pulse width for the Programmable Pulse output.
Format: nnn.nn = 0.01 to 600 seconds in 10-millisecond increments
Response: < CR >< LF >
For values greater than 1, use a decimal point and enter trailing zeros as applicable.
Examples: 1 = 0.01 second
10 = 0.10 second
1.00 = 1 second
100 = 1 second