Arbiter Systems 1200B, Руководство по эксплуатации

Страница: 111 / 218

11.2 Standard Command Set 93
11.2.3 Event Mode Commands
Return Specific Event
Command: nnA
Sets the event buffer read index to a specific event number (01 to 50), and returns that event information in
either Local or UTC time format depending on how the command, nTA is configured.
Response: mm/dd/yyyy hh:mm:ss.sssssss nnAz
< CR >< LF >
Where: mm = month
dd = day of month
yyyy = year
hh = hour
mm = minute
ss.sssssss = second
nn = Event–Buffer Read Index Number
A = channel A
z = time reference U = UTC, L = Local
= space, Hex 20
< CR > = Carriage Return = Hex 0D
< LF > = Line Feed = Hex 0A
Set Event Channel Time
Command: nTA
Sets the time reference to either UTC or local.
Format:
n = time format: 0 = UTC, 1 = local
Response: < CR >< LF >
Set Channel: Deviation
Command: AD
Sets channel A to the 1 PPS deviation mode.
Response:
< CR >< LF >
Set Channel: Event
Command: AE
Sets Channel A to the event recording mode.
Response:
< CR >< LF >
Clear Event Buffer
Command: CA
Clears the channel A event buffer and then resets the read and write indices to 0.
Response:
< CR >< LF >
Return Deviation for Event Channel
Command: DA
Returns 1 PPS deviation and sigma for the event input.
Response:
± dddd.dd ssss.ss < CR >< LF >
Where: dddd.dd = the deviation from 1 PPS (GNSS), averaged over 16 samples
ssss.ss
= the standard deviation (sigma) of samples
< CR > = Carriage Return = Hex 0D
< LF > = Line Feed = Hex 0A