Arbiter Systems 1088A, Руководство по эксплуатации

Страница: 95 / 279

9.2 Command Set 75
Broadcast Mode - NMEA183ZDA
Command: 1,nB
1,nB configures the clock to broadcast the National Marine Electronics Association Standard
(NMEA - 0183) to broadcast ZDA format from the main RS-232C port, where n = the update rate
in seconds from 1 to 9999. ZDA, time and date, includes the UTC day, month, year, and local time
zone.
Response:
$–ZDA,hhmmss.ss,dd,mm,yyyy,xx,xx
C
Where: ZDA Time and date
hhmmss.ss Time in UTC
dd Day, 01 to 31
mm Month, 01 to 12
yyyy Year
xx.xx Local zone description, 00 to +/- 13 hours and minutes
9.2.2 Event Mode Commands
Return Specific Event
Command: nnnA, nnnB
nnnA sets the event buffer read index to a specific event number (0 to 199) for channel A, and nnnB
sets the event buffer read index to a specific event number (0 to 199) for channel B. It then returns
that event information in either Local or UTC time format depending on how the command, nTA
or nTB is configured.
Response:
LCL mm/dd/yyyy hh:mm:ss.sssssss nnnAL (or ...BL)
C
or
UTC mm/dd/yyyy hh:mm:ss.sssssss nnnAU (or ...BU)
C
Format: nnn Event–Buffer Read Index Number
A Channel A
B Channel B
U UTC Time, Channel A or B.
L Local Time, channel A or B.
Set Event Channel Time
Command: nTA, nTB
nTA sets the channel A time source, and nTB sets the channel B time source, as either Local or
UTC, where n = 0 sets the event time to UTC and n = 1 sets the event time to Local.
Response:
C
Set Channel – Deviation
Command: AD, BD
AD sets channel A, and BD sets channel B, to the 1-PPS deviation mode.
Response:
C