Arbiter Systems 1088A, Руководство по эксплуатации

Страница: 51 / 279

5.2 Changing Hardware Settings Via Internal Jumpers 31
Output Signal Output-Function Output-Mode
Description Jumper Position Jumper Position
IRIG-B Modulated 10 Vpp 1* C*
Deviation (5 V) 2 C
IRIG-B 3* A*
IRIG-E 4 A
IRIG-H 5 A
10 MPPS 6 A
5 MPPS 7 A
1 MPPS 8 A
100 kPPS 9 A
10 kPPS 10 A
1 kPPS 11 A
100 PPS 12 A
60 PPS 13 A
50 PPS 14 A
10 PPS 15 A
IRIG-D/1 PPM 16 A
1 PPH 17 A
1 PPS 18 A
Programmable Pulse 19 A
Out-of-Lock 20 A
IRIG-B Modified Manchester 21 A
Spare 5 V CMOS 22 A
Table 5.2: Output Signal Function Selection
*Default jumper selections
5.2.8 I/O Connectors Used as Output
For each I/O connector, it is necessary to set 2 jumpers in order to assign the output (or input)
signal. The following paragraphs describe the procedure for setting these jumpers. For standard
configuration, J2 and J3 are set to unmodulated IRIG-B, J4 and J5 are set to modulated IRIG-B.
For example, to set J2 as modulated, JMP4 = 1 and JMP6 = C.