Arbiter Systems 1088A, Руководство по эксплуатации

Страница: 136 / 279

116 Options List
C.5 Option 04: Parallel BCD Output
C.5.1 General Description
The Option 04 has 1 millisecond Resolution and expands the capabilities of the Model 1088B to
include:
•
Either of the following:
– Time-of-year output in Binary-Coded Decimal (BCD) format, with resolution down to
1 millisecond;
– Parallel Data output, with up to 48 bits that can be custom-configured at the factory
for specific applications;
• A continuous 1 pulse-per-second (1 PPS) output, with the rising edge of a 10 millisecond-wide
pulse synchronous to the rising edge of 1 PPS/GPS;
•
A continuous 1,000 PPS (1 kPPS) square wave output, with rising edges synchronous to the
rising edge of 1 PPS/GPS;
•
Four pins of the output connector that can be configured with combinations* of the following:
– Up to four digital signal outputs, the functions of which can be selected individually
from 18 choices.
– Up to two analog signal outputs, the functions of which can be selected individually
from two choices.
*Note: Since these auxiliary functions must share four connector pins, certain limitations will
apply when selecting combinations:
1. Enabling any one (or more) of the digital signal outputs precludes four bits from the parallel
data output, if used;
2. Each analog signal output used precludes one of the digital signal outputs; if two analog signal
outputs are employed, only two digital signal outputs are possible. Also, each analog signal
output displaces one bit from the parallel data interface, if used;