User manual - Uniline Compact
10/2021
DOP_1363_A
7
2.2 Products description
UC206N / UC206W
The UC206N is the main component of the Uniline Compact
line array designed for medium and long range broadcasting
due to its constant horizontal directivity of 70 °.
The UC206W uses the same technologies and components
as the UC206N but is designed and optimized for short
and medium range and «downfill» broadcasting due to its
constant wide horizontal directionality of 105 °.
All other acoustic characteristics are common.
The UC206N and UC206W are bi-amplified 3-way acoustic
speakers: LO (60 - 600Hz) and HI (600Hz - 20kHz) section.
The impedance of each section is 16 Ohms, allowing use of
up to 8 speakers in parallel.
5 transducers equip the UC206N and UC206W loudspea-
kers.
The LO section consists of two 6.5’’ neodymium drivers
loaded in compression and optimized for low frequency
reproduction. The control of the horizontal directivity, the
acoustic load, the temporal alignment and the protection of
the transducers are provided by the acoustic horn and front
protection grille assembly.
The HI section is made up of a coaxial assembly of two 5’’
and 1’’ neodymium transducers loaded onto a proprietary
APG Isotop15
TM
waveguide.
It provides superior performance to a traditional compres-
sion chamber with a significant extension of the frequency
response combined with increased power handling and
reduced distortion.
Isotop
TM
technology uses an annular acoustic lens that
allows for impedance matching and a line source isophase
wavefront at the horn output.
The 3-point captive hanging system allows the choice of
hanging or standing the system simply.
Angles are set from a single point on the rear of the speakers
in 1 ° increments, from 0 to 15 ° (16 angles available).
UC206N
UC206W
UC206N
Fenêtre oblongue (suspente)
Fixed hole (stacking)
Angle selection
UC206W
Internal view frome above
Adjustment of the angle between
speakers at a single point from 0 ° to
15 ° in steps of 1 °
