araknis AN-100-AP-I-N Скачать руководство пользователя страница 30

Страница: 30 / 100

Araknis Networks Wireless Access Point

Product Manual

System Settings

-Return to Table of Contents-

13.2 - Date and Time Settings

Allows configuration of the ‘real world’ time setting and how it is kept set correctly for all access point
functions.

Figure 24.

Date and Time Settings

Path –

Settings, System, Date and Time Settings

Parameters –

• Manually Set Date and Time –

Select to manually set date and time.

• Date

– Enter the year, month and date (four digits for year; two digits for month, two digits for

date)

• Time

– Enter the hour and minutes for the correct current time. Use a mobile device or

satellite clock for accuracy.

• Synchronize with PC –

Click this button to automatically sync the access point to a connected

computer.

• Automatically Get Date and Time –

Select to automatically get date and time from various web

resources.

• NTP Server

– Select an NTP (Network Time Protocol) Server to set reference standard date

and time.

Default: time.nist.gov.

Configuration Instructions –

1. Click

Settings, System.

2. Specify the date and time settings.

3. Click

Save

, then

Apply Changes

to enable the new settings.

Содержание AN-100-AP-I-N





































































































Результаты поиска

Содержание AN-100-AP-I-N

Отзывы:

Бренды по названию

Популярные бренды

araknis AN-100-AP-I-N, Руководство по эксплуатации продукта

Результаты поиска

Содержание AN-100-AP-I-N

Отзывы:

Бренды по названию

Популярные бренды