BK560 Rev 10
Page 13
Ecoboiler Stove User Guide
6.5 Ash removal
The ash pan should be emptied when the level of ash reaches the top of the ash pan. On no
account should the ash be allowed to build up to touch the underside of the grate bars, as this will
greatly reduce the lifespan of the grate.
To remove ash use the supplied operating tool::
You should ALWAYS USE the supplied glove and operating tool.
Open the door of the stove, pausing briefly when ajar so as to allow the fire to adjust to the
increased air supply
Put the fork end of the operating tool into the slots of the ash pan
Carefully remove the ash pan from the ash pit chamber.
Empty the ash into a suitable container and replace the ash pan into the stove, withdraw the
operating tool and close the fire door.
Warning: The ash can be very hot. Care must be taken not to burn
hands or household objects with falling embers. Empty only into a
metal container. Even if ash appears cold, red-hot embers may be
concealed and could easily start a fire or cause injury.
6.6 Multi fuel grate (except Ecoboiler Wood)
The grate in your Ecoboiler stove comprises of a series of reciprocating cast iron bars seated on
a pivoted comb. These should come pre-assembled in your new stove.
All bars in the grate are identical, but every other bar is turned 180 degrees with the ends of the
bars marked "H" sitting on the high sections of the comb, and the ends marked "L" sitting on the
low sections.
The riddling lever, either on the side or front of your stove, can be operated with the stove
operating tool to riddle ash into the ash pan below. Only riddle the stove with the door closed
unless your stove requires you to open the door to access the riddling mechanism. Stop riddling
once red embers begin to fall into the ash pan.
After extended use it may be necessary to replace some of the grate bars. Periodic inspection of
the bars is recommended and any damaged bars should be replaced. Also check for obstructions
that may prevent the operation of the riddling mechanism.