AR FI7000, Руководство по эксплуатации и обслуживанию

Страница: 29 / 54

Rev F 13
3. OPERATION
3.1 WARNINGS AND CAUTIONS
Throughout this manual, the symbol:
WARNING:
indicates that a hazard exists that may result in personal injury or loss of life.
CAUTION:
indicates that failure to follow procedures may result in damage to the
equipment.
WARNING: DANGER - High Voltage Present:
The probe interface assembly operates from AC line voltages which may
present a shock hazard.
WARNING: Safety Ground
Improper grounding of this equipment can result in electric shock. The
unit must be operated only with a line cord with a safety ground wire. It is
the user's responsibility to ascertain that the power connector is properly
wired and that the power outlet is grounded.
LASER WARNING:
This Class 1 laser product contains an embedded Class 4 laser light source
which may be hazardous. Only trained, qualified personnel should
operate, maintain, and service it.
WARNING: Explosive Atmosphere
To avoid explosion, never operate this unit in an explosive atmosphere.
This equipment is not certified for operation in an explosive atmosphere.
3.2 LASER SAFETY
This Class 1 laser product contains an embedded Class 4 laser with a peak output of 500mW and a
wavelength of 850mm. Under normal use, the laser radiation is completely contained within the fiber optic
cables and poses no threat of exposure.
3.2.1 Safe Operating Procedures and Precautions
To ensure safe operation, the following are recommended:
•
Familiarize yourself with this manual and the safety information contained within.
•
Be sure you understand the safe and proper use of this laser-powered field measurement system.