Model 125W1000A
Rev A
35
4.3.7
Low or No Power Output (RF Test) (Diagram 10052988)
NOTE: The DC Tests specified in Section 4.3.7 should be completed before conducting the RF tests specified
in the following sections.
1.
The Model 125W1000A’s typical gain response at -20 dBm input and 0 dBm input is shown in Figure 4-1
and Figure 4-2. The actual gain may vary considerably from that shown in these Figures but should be
≥
55dB at -20dBm input and
≥
51dB (125 Watts) at 0dBm input.
Figure 4-1. Typical Response at -20 dBm Input
Figure 4-2. Typical Response at 0 dBm Input
Содержание 10052381
