Aquor
®
House Hydrant V2+
ASSE 1019A CERTIFIED / meets IAPMO/cUPC
3
www.aquorwatersystems.com
(800) 458-1749
Overview
OVERVIEW
Aquor House Hydrant V2+
The
Aquor
®
House Hydrant is a flush-mounted
hydrant with twist-lock connection system designed
for outdoor use.
The house hydrant is intended to be installed in
the exterior walls of homes and buildings. Upon
disconnection, a small amount of water self-drains
from the outlet. The Aquor
®
hose connector has a
built-in vacuum breaker for code approved
anti-siphon protection.
INCLUDED IN THIS KIT
x1 Stainless Steel Hydrant
x1 Hose Connector (CN-S1)
x1 Debris Cover
x4 #10 1.5” Mounting Screws
Read this entire instruction sheet before installing to ensure proper
installation.
The information in this manual is subject to change
without notice.
Hydrant can only provide freeze protection when disconnected and
allowed to drain.
Intended for irrigation use and outdoor watering. Shall not be
subjected to more than (12) hours of continuous water pressure as
directed by ASSE code requirements.
Installation must comply with local codes and ordinances.
Please leave this manual with the property owner after completing the
hydrant installation.
FEATURES & BENEFITS
•
Allows user to access water instantly by
connecting under full water pressure.
•
Integral vacuum breaker in faceplate provides
anti-siphon protection.
•
Robust O-ring connection system ensures a
reliable leak-proof seal, even at high water
pressures.
•
Stainless steel operating rod and pressure-closed
valve provide zero-maintenance reliability for
years.
•
Hydrant automatically self-drains upon
disconnection to provide freeze protection.
•
Hydrant comes standard with
1/2
” female NPT
inlet. Rotatable 90° elbow and other optional
inlets available.
•
Any
3/4
” accessory (e.g. water timers, splitters,
regulators) can be attached to end of hose
connector.
•
Aquor® hose connector contains integral check
valve for additional backflow protection.
