E - 14
9. XM OPERATION
Listeners can subscribe to XM Radio on the Web by visiting www.xmradio.com, or by
calling (800) 967-2346. Customers should have their Radio ID ready (see “Displaying the
Identification (ID) Code”). Customers can receive a limited number of free-to-air channels
without activation.
This unit supports the XM Mini Tuner only.
Accessing XM Radio Mode
To switch to XM Radio mode, press the MODE button until “XM RADIO” appears on the
display.
Displaying the Identification (ID) Code
Before you listen to XM Radio, you must subscribe to the service using your radio's
identification number. To display the radio ID, press the UP TUNING ( ) or DOWN
TUNING ( ) button to access channel 000. The screen displays “RADIO ID” followed by
an 8-figure ID number.
Selecting a Station
Press the UP TUNING ( ) or DOWN TUNING ( ) button to change to another station.
Holding UP TUNING ( ) or DOWN TUNING ( ) activates the fast channel up or down.
Preset Stations
Press BAND to change between three XM Radio bands. Each band stores up to six preset
stations. You can store and recall a total of 18 preset stations.
Store a Station
1. Select a band (if needed), then select a station.
2. Hold a preset button for three seconds. The preset number appears in the display.
Recall Station
1. Select a band (if needed).
2. Press a preset button to select the corresponding stored station.
XM Display Information
Pressing the AS/PS button will change the XM information display ,in the below order:
Channel Name Genre (News, Sports, Hits, Kids, etc.) Artist name Song Name If the
selected channel name, artist, or title exceeds eleven characters, the display information
will scroll twice upon selection.
XM Channel Searching Method, There Are Two Different Methods. Method 1-Direct Tuning
Mode
To enter a station directly, perform the following steps.
1. Press and hold the BAND button until “Direct-T” appears.
2. Press Vol Up/Down to display XM CH 0 _ _.
3. Press Vol Up/Down again to select the first digit of the channel you want to tune to (0, 1, or 2).
4. Press the AUDIO button to enter the first number and move to the second position.
5. Press Vol up/down again to select the second digit of the channel you want to tune to (0 - 9).
6. Press the AUDIO button to enter the second number and move to the third position.
Note: Use the UP TUNING ( ) or DOWN TUNING ( ) button to move between the
first and third positions.
7. Turn the Vol up/down again to select the third digit of the channel you want to tune to (0 - 9).
8. Press the AUDIO button to enter the third number and access the channel.
If the channel is unauthorized or invalid, “CH Unavail” appears on the LCD and return to
the input interface after 2 seconds.