Mounting bracket and plumbing
This guide covers installation and maintenance of a basic “generic” system. Installer determines
configuration of each system and must adapt these instructions to meet the specific
requirements for that configuration. Using pipe dope voids the warranty. All inter-component
connections use standard plumbing components and tools.
Additional installation instructions
Caution: do not use any damaged component.
If damage is found, contact Aquasana at 866-662-6885.
1. Unpack boxes and verify that all required components are included.
2. Inspect each component for damage.
3. Determine location for installation of the UV system:
A. The UV well water filter system must be installed with the sumps oriented vertically.
B. Mounting point should allow sufficient room above and below UV system to service the
sumps and UV lamp without removing the UV system. The minimum space is 20” (above
and below).
4. For ease of mounting, reduce the weight of the larger systems by removing the sumps and
filters prior to installing the mounting bracket.
5. Select a location and install the mounting bracket using the provided screws
Warnings
• Follow instructions carefully!
• Never look directly at a lighted UV lamp.
• Ultraviolet rays can be harmful to eyes.
• Always shut off water to system and disconnect power when servicing.
• Assembly is required before installation.
• Internal components are fragile.
• This system must be installed in accordance with applicable city, country, and local
plumbing codes.
• Aquasana products are designed to provide years of trouble-free service if properly
maintained.
• Retain these instructions for future service or usage information.
The UV Filter included with your Aquasana
Whole House Well Water filter is the best line of
defense against bacteria that other filters don’t treat.