AQUAPHOR APRO 1000 LPH, Руководство пользователя

Страница: 74 / 83

74
Parameter Address Unit Type
Start up permit* (Status word #4) 0025 - 16-bit unsigned int
Output Values* (Status word #3) 0026 - 32-bit unsigned int
Errors* (Status word #5) 0028 - 32-bit unsigned int
Detected Errors* (Status word #5) 0030 - 32-bit unsigned int
Startup Errors* (Status word #6) 0032 - 32-bit unsigned int
Permeate Flow 0034 LPM | GPM (x10) 16-bit unsigned int
Feed Flow 0035 LPM | GPM (x10) 16-bit unsigned int
Recovery 0036 % (x10) 16-bit unsigned int
Tds 1 0037 uSm | ppm 16-bit unsigned int
Tds 1 temp. 0038
ֲ
°C |
ֲ
°F 16-bit unsigned int
Tds 2 0039 uSm | ppm 16-bit unsigned int
Tds 2 temp. 0040
ֲ
°C |
ֲ
°F 16-bit unsigned int
Total Permeate 0041 l (x10) 16-bit unsigned int
Total Feed 0042 l (x10) 16-bit unsigned int
Average Recovery 0043 % (x10) 16-bit unsigned int
Operating Time 0044 sec. 32-bit unsigned int
STM Serial Number 0046 - 32-bit unsigned int
Low feed pressure 0048 bar (x10) 16-bit unsigned int
Low inlet pressure 0049 bar (x10) 16-bit unsigned int
High RO pump pressure alarm 0050 bar (x10) 16-bit unsigned int
System stop perm. tank pressure 0051 bar (x10) 16-bit unsigned int
System start perm tank pressure 0052 bar (x10) 16-bit unsigned int
Cartridge filter press. drop alarm 0053 bar (x10) 16-bit unsigned int
Cartridge filter resource 0054 m
ֲ³
(x10) 16-bit unsigned int
Resource counter 0055 - 32-bit unsigned int
Feed pressure 0057 bar (x10) 16-bit unsigned int
Inlet pressure 0058 bar (x10) 16-bit unsigned int
RO pump pressure 0059 bar (x10) 16-bit unsigned int
Permeate pressure 0060 bar (x10) 16-bit unsigned int
Pressure difference 0061 bar (x10) 16-bit unsigned int
GSM module status 0062 - 16-bit unsigned int
GSM IP 0063 - 32-bit unsigned int
*
For version CI/HF
11.4 CONTROL WORD
▪ Address 0000, 16 bit unsigned “Write only”.
▪
This register starts the RO system.
# Meaning Register Value
1 System Start 0
2 System Stop 1