AQUAMAXX FR-SE GFO страница 4 Скачать руководство пользователя

Страница: 4 / 5

Adding Media to the Reactor (con.)

Inlet

Fitting

For media designed to be fully fluidized, the reactor should be filled

no more than two-thirds full to allow the media room to move around.

With heavy or fine media, you may need to add less.

Cover the opening of the inlet pipe to block media from falling in prior to pouring your chosen

media into the reactor chamber.

Slide the sponge and upper media plates onto the central inlet pipe

until it touches the stopper. It may fit snugly, so please use caution

when sliding it on.

Replace the reactor lid, pressing down firmly onto its center and locking the water inlet pipe into the

fitting on the underside of the lid. Turn the lid clockwise to close. Gently tighten the thumbscrews

in a criss-cross pattern to evenly secure the lid. CAUTION: Do not overtighten screws.

Содержание FR-SE GFO

Страница 1: ...www aquamaxxaquariums com info aquamaxxaquariums com www aquamaxxaquariums com FR SE GFO Carbon Biopellet Hang On Filter Media Reactor User s Manual ...

Страница 3: ... then remove the lid by twisting in a counter clockwise motion Remove the upper media plates and upper filter sponge Ensure that the lower filter sponge is all the way at the bottom of the reactor chamber flush against the lower media plate to prevent media leakage Adding Media to the Reactor ...