33
User manual S200 WCS
Update August 2021
7 Initial commissioning
7.1 Checking the ha rdware ins tallation
Warning:
Before connecting the supply voltage to the device, check the supply voltage against
the data on the rating plate and compare these.
Check the wiring of the device against the wiring diagram.
7.2 Basic device settings
After switching on, select the function
“Enter code”. Code “Level 3” is required for the basic
settings of the device.
After entry of the code, select the function
“Basic settings”.
7 . 2 . 1 Pa ra m e ter s / Re ad i n g as sig nm e nt
Select the function
“Select parameters”.
/Basic settings/
Depending on the device version (order size), up to six parameters can be selected.
/Basic settings/Select parameter
