AquaLabo Secomam STAC2 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 74

background image

STAC2

- 12 -

4

PRECAUTIONS OF USE

➢

Always make sure that the instrument is connected on the good voltage.

(24VDC +/-0.5VDC 3A or Between 100

– 240V 50-60Hz with External Power supply option)

➢

Always disconnect the instrument mains power plug before starting any work inside the
instrument.

➢

When dangerous substances for health and environment are used, the laboratory or site
rules, where the instrument is installed must be followed.

➢

Take all the necessary precautions, during the use the instrument, to protect the operator
from eventual liquids leaks or spills or possible radiations (protective gloves, anti-UV
radiation glasses , protected clothes, etc)

.

Keep the sample and cuvette area clean (no liquids or spills).

➢

The XENON lamp used in this unit emits UV radiation and must be never touched or
dismounted outside expert people.

➢

Install the instrument in a ventilated area because of ambient temperature limits (see
details) for a correct measurement working.

➢

All operations made inside the instrument, must be done by AQUALABO or by
AQUALABO

’s authorized technicians.

➢

Use of the spectrophotometer without danger

If it is necessary to suppose that it is not possible any more to use the
spectrophotometer without danger, it is necessary to put it out of service and to protect
it from involuntary starting up again.

Use without danger will not be possible when the spectrophotometer

•

suffered damage during transportation.

•

was stored under inadequate conditions for one relatively long period

•

present some visible damages.

•

does not function any more as desc

ribed in the user’s manual.

In case of doubt, consult the spectrophotometer supplier.

«
...
10
11
12
13
14
...
»

Содержание Secomam STAC2











































































Отзывы:

Нет отзывов

Похожие инструкции для Secomam STAC2

Бренд: PAT Страницы: 55

Бренд: PAT Страницы: 31

Бренд: Tactical Controls Страницы: 11

Бренд: FarmChem Страницы: 8

Бренд: Hach Страницы: 28

Бренд: janitza Страницы: 12

Бренд: QUBINO Страницы: 2

Бренд: Bamo Страницы: 17

Бренд: HBM Страницы: 84

Бренд: Fluidwell Страницы: 48

Бренд: Velleman Страницы: 15

Бренд: Konica Minolta Страницы: 42

Бренд: Kobold Страницы: 12

Бренд: Magnescale Страницы: 2

In-Situ Rugged TROLL 100

Бренд: Geotech Страницы: 6

Бренд: PTC Instruments Страницы: 2

KS-PH-221-DELUXE

Бренд: Kensington Страницы: 14

WIDE ANGLE CONVERSION PORT 2

Бренд: Nauticam Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды