Aquacal SunPower SP05, Руководство по установке

Страница: 72 / 108

Page - 68
Relays
Parameter Description
Name A set of labels are provided for easy identification of the relay.
Relay Type Currently there is only one choice for this option. (24 VDC RELAY).
Port
This is the connection port where the device is connected to the heat
expansion board.
Lights
Parameter Description
Name A set of labels are provided for easy identification of the relay.
Light Type Generic, Pentair, Jandy, Hayward, PACFAB SAM, and SR SMITH
Port
This is the connection port where the device is connected to the heat
expansion board.
Chlorinator
Parameter Description
Name
A set of labels are provided for easy identification of the chlorination
system's connection port on the control board.
Chlorinator
Type
Currently there is only one choice for this option. (CHLORSYNC).
Port
This is the logical ID of the device (default is "BROADCAST"). The
device itself would be connected to the heat pump via a PoolSync
device on port "D". See "
PoolSync® WI-FI Controller (ECP0343) " on
page 64.
2.6 Factory Reset
A factory reset of all settings can be performed.
This will reset all settings to factory defaults.
PLEASE NOTE:
This action will wipe all previously set configurations such as external controller
settings, optional device settings, groups, equipment, schedules, and site specific settings
and return the heat pump to its default firmware settings from the factory.
NOTICE
Failure to heed the following may result in damage to equipment.
l
Any site specific settings entered by the installer will be lost when performing this operation.
IF UNIT IS ASLEEP,
SWIPE TO WAKE UP
A
PRESS MENU
BUTTON
B
USE ARROWS TO
"SYSTEM"
2
-
A
ppe
ndi
x