Aquacal SunPower SP05, Руководство по установке, Страница: 57 / 108

Page - 53
3
USE ARROWS TO
PROGRAM TO EDIT
4
ENTER TO EDIT
5
USE ARROWS TO
"CLEAR"
6
ENTER TO SELECT
7
SELECT "YES" TO
CLEAR PROGRAM
MENU TO EXIT, PRESS
& HOLD TO STATUS
1.6.k Schedule and Program Modes
Schedules can be deactivated temporarily as needed. Either globally through a schedule mode, or
individually by setting a group's program mode.
SCHEDULE
MODE
Description
"AUTO"
The default mode. This allows schedules to
run normally. See " Set Schedule Mode to
"AUTO" " on the next page.
"AWAY"
This mode is generally used when the user is
away on vacation and doesn't want to
maintain a water temperature. The heat pump
will be deactivated while the rest of the
schedules (including filtration) are allowed to
continue.
See " Set Schedule Mode to
"AWAY" " on the next page.
"OFF"
This mode turns off all schedules. The
schedules resume when the schedule mode is
set to "AUTO" again. Please note - this will
also halt any connected circulation pump
activity. This option is not meant for long
term usage.
See " Set Schedule Mode to
"OFF" " on page 55.
PROGRAM
MODE
Description
"ON"
A group's scheduled programs are set to
operate normally. See " Set Group Programs to
"ON" " on page 55.
"PAUSED"
A group's scheduled programs will be
paused. The programs will automatically
resume the next scheduled day. No other
group's activities will be effected.
See " Set Group Programs to
"PAUSED" " on page 56.
"OFF"
This mode turns off all schedule programs
for the group indefinitely. Programs resume
when the program mode is set to "ON" again.
See " Set Group Programs to
"OFF" " on page 57.
1
-
Ins
ta
lla
tion