Packaging
piece
Packaging
piece
Packaging
piece
Packaging
piece
Step
8
Step
9
Fit the Dividers
Push the Dividers onto
the Base
and fix them
using four 40mm screws.
6
E
E
E
E
Raise the assembly
To make it easier to fit
the Top Panel, place
packaging pieces
underneath the Side
Panels to raise the
assembly.
The rest of the stages will show
the Hinge Plates on the Right
Divider. You may have chosen to
fit them on the Left Divider.
3
4
Step
10
A
A
A
Finished
Front Edge
A
A
A
A
A
A
A
5
K
K
K
Prepare the top
Screw 10 Metal Dowels
into the Top.
Fit the 2 Brackets from
the Overbalance
Protector Kits to the
shallow mark-holes
drilled into the Top
using 1 of their Screws.
Note:
Only fit 1 of the
Screws, the other 1 will
be fitted later.
