APV ES 100 M3 EVO, Оригинальное руководство по эксплуатации

Страница: 26 / 32

26
Quality for Professionals
11 Maintenance and care
To maintain the implement in good condition even after a long service life, the
following instructions must be observed:

Original parts and accessories are designed especially for the machines or
implements.

Please note that spare parts and accessories not supplied by us have also not
been tested and approved by us.

The installation or use of such products can therefore possibly negatively change
or impede the constructional properties of your implement. The manufacturer rules
out any liability for damages resulting from the use of non-original parts and
accessories.

The manufacturer is not liable for any unauthorised modifications and the use of
components and auxiliary parts.

All bolted connections should be re-tightened at the latest after 3 operating hours
and again after 20 hours, and then checked regularly. Loose bolts can cause
significant consequential damage, which is not covered by the warranty.

Do not clean the implement with water. Clean the implement with compressed air,
however, make sure that the pressure is not too high. The paint can be damaged
by cleaning with excessive pressure.

Park the implement protected from weather conditions.

During the winter, the implement should be protected against rust with an
environmentally-friendly product.
12 Storage and disposal
To ensure that the spreader remains fully functional even if it is out of operation for
longer periods of time, it is important to take precautions for storage.
This is how to prepare the spreader for storage:
1. Completely remove all seed from the spreader.
2. Clean the spreader inside and out.
3. Store the spreader in a dry place to prevent the formation of germs inside the
implement.
The spreader must be stored in a dry place protected from weather conditions to
ensure that it remains functional even if it is stored for a longer period of time.
Disposal of the spreader must be performed according to the local disposal regulations
for machines.