APV ES 100 M3 EVO, Оригинальное руководство по эксплуатации

Страница: 13 / 32

13
Quality for Professionals
7.6 Control box
The ES 100 M3 EVO has a control box with a hermetically sealed keyboard foil. On
the bottom side, a 2-pin plug (connection to the battery) and a 4-pin plug (connection
of the spreader to the control box) are installed.
Button Designation Use
On/Off button Switches the implement on or off
Minus button Reduces the speed of the spreading disc
Plus button Increases the speed of the spreading disc
Slider closed Close slider
Slider open Open slider

Press the On/Off button.

The controls are switched on and the control lamp above the button lights up.

Using the plus and minus buttons, set the desired speed for the spreading disc.

Start driving and open the slider using the "Slider open" button.

The control lamp for "Slider open" lights up above the button.

The spreading material trickles onto the spreading disc and is distributed
accordingly depending on the speed.

When stopping, press on the "Slider closed" button.

The slider is closed and the control lamp for "Slider closed" lights up above the
button.

When leaving the field, switch off the control box using the On/Off button.
Digital display
Lights up when
the slider is
closed
Lights up when
the implement is
switched on
Lights up when the
slider is open
Fig.: 8