WorldCast Equinox - Release 3.1 - user manual
– 07/2011
Page 140
Whiterock Business Park - 729 Springfield Road - Belfast BT12 7FP - Northern Ireland
Tel.: +44 28 9067 7200 | Fax: +44 28 9067 7201 | http://www.aptcodecs.com
To change an entry locate the entry by typing in the entry number or by using the
and
buttons to se-
quence up and down the list. The screen will display the current contents of the entry
– simply change any of
the entries to the new desired value.
Once you have entered all of the ISDN speed dial information click to
configure the WorldCast Equinox
If you decide not to configure the ISDN speed dial click to revert back
to the old information
Note:
It is possible that configuring ISDN speeddials (which are saved to the unit„s flash memory)
may cause glitching of the audio in a live IP connection.
6.5.16.
IP Performance Monitoring
The IP performance monitoring window displays information regarding the IP statistics of the unit. This infor-
mation will only be available when an IP connection is in progress.
It will also show the aux and relay statistics assuming these are enabled for aux and relays over IP.
IP Statistics / Performance Monitoring
Below is a table outlining the information contained in the performance monitoring window.
Statistic
Description
Tx Packet Count
Number of packets transmitted
Tx kilobytes
Number of kilobytes transmitted
Tx bit rate
Average transmit bit rate (calculated every second)
Rx packet count
Number of received packets
Rx kilobytes
Number of kilobytes received
Rx bit rate
Average receive bit rate (calculated every second)
LOC errors
Loss of connection, the buffer has dropped to less than 10% and the re-
ceiver has reset the input buffer
Dropped packet
count
A single packet has been dropped (if you drop 100 packets, you get 100
dropped packet count)
Misconfigured
A RTP packet arrived with a payload type not compatible with the current
