WorldCast Equinox - Release 3.1 - user manual
– 07/2011
Page 119
Whiterock Business Park - 729 Springfield Road - Belfast BT12 7FP - Northern Ireland
Tel.: +44 28 9067 7200 | Fax: +44 28 9067 7201 | http://www.aptcodecs.com
This setting is set to automatic by default so that the codec will auto negotiate the speed.
Fallback
When the normal auto-negotiation process fails to determine compatible link speed and link duplex set-
tings. The system will determine the line speed using different methods. It is impossible to determine the
duplex settings of the network. This setting will be the duplex setting when auto-negotiation fails.
Control
How speed of network port is configured. Via auto-negotiation, restricted auto-negotiation or manually
configured. If auto or restricted auto-negotiation are selected, both speed and duplex settings should
ALWAYS follow on the switch. For manual the switch will need to be configured to the same settings as
auto-negotiation will not occur
Current (only shown if manual mode is selected)
Current setting of the phy.
Note:
Changing these settings could without due consideration could cause the codec to not respond
Note: To save any of these settings the user must exit from the menu.
6.5.3. Sys
– Time
Click on the Time tab and set the unit‟s date and time.
Time configuration screen
To change the date you can use the drop down to display a calendar and you can use it to select the date you
want. You can right click on the calendar and select “Go to today” to simply use the PC‟s date. Alternatively you
can click on the day or year to enter a new value.
To change the time click on the hours, minutes or seconds and enter a new value or use the
and
but-
tons to increment or decrement to a new value.
Click Refresh to upload the selected values to the WorldCast Equinox unit.
