APsystems YC1000-3-208 Скачать руководство пользователя страница 3

Страница: 3 / 23

APsystems YC1000-3 Installation/User Manual

Important Safety Instructions

This manual contains important instructions to follow during installation

and maintenance of the APsystems Photovoltaic Grid-connected Inverter

(Microinverter). To reduce the risk of electrical shock and ensure the safe

installation and operation of the APsystems Microinverter, the following
symbols appear throughout this document to indicate dangerous conditions

and important safety instructions.

SAVE THESE INSTRUCTIONS!

This manual contains important instructions

for models YC1000-3-208/YC1000-3-480 that must be followed during

Installation and maintenance of the Photovoltaic Grid-connected Inverter.

Specifications subject to change without notice - please ensure you are using

the most recent update found at www.APsystems.com

WARNING:

This indicates a situation where failure to follow

instructions may cause a serious hardware failure or personnel

danger if not applied appropriately. Use extreme caution when
performing this task.

NOTE:

This indicates information that is important for optimized

Microinverter operation. Follow these instructions closely.

Radio interference statement

FCC Compliance

：

The equipment can comply with the limits for a class B

digital device, pursuant to part 15 of the FCC Rules, which are designed to

protect against harmful interference in a residential installation. The

equipment could radiate radio frequency energy and this might cause harmful

interference to radio communications if not following the instructions when

installing and using the equipment. But there is no guarantee that interference

will not occur in a particular installation. If this equipment causes harmful

interference to radio or television reception, the following measures might

resolve the issues:

A) Relocate the receiving antenna and keep it well away from the equipment.

B) Consult the dealer or an experienced radio / TV technical for help.

Changes or modifications not expressly approved by the party responsible

for compliance may void the user’s authority to operate the equipment.

WARNING

SYMBOL

NOTE

SYMBOL

Содержание YC1000-3-208























Результаты поиска

Содержание YC1000-3-208

Отзывы:

Похожие инструкции для YC1000-3-208

Бренды по названию

Популярные бренды

APsystems YC1000-3-208, Инструкция по установке и эксплуатации

Результаты поиска

Содержание YC1000-3-208

Отзывы:

Похожие инструкции для YC1000-3-208

Бренды по названию

Популярные бренды