OPT700/OPT700L Installation/User Manual
9
Installation Procedures
Step 3 - Connecting the APsystems Optimizer DC output Cables
Figure 5
NOTE:
Make sure that all DC cables are connected correctly.
NOTE:
DC extension cable length can be customized based on
the actual installation environment. Please contact APsystems
to purchase the cables.
Step 4 - Completing the APsystems Installation Map
Fill in the APsystems registration cards, which provide system information
and the installation map. Feel free to provide your own layout if a larger or
more intricate installation map is required. The layout map provided is
designed to accomodate labels in vertical or horizontal orientation to meet
all the field PV connections.
a. Each APsystems optimizer has removable serial number labels.
Peel the labels off, affix one to the respective location on the
APsystems installation map, then affix another label to the PV
module frame so that it can be easily seen. The warranty cards
can be found in the appendix of this manual or at the APsystems
website,
b. Fill in the warranty cards and email to APsystems at
c. APsystems will create the EMA account and email you the account
information. Then you can use the EMA website to view detailed
performance of your PV system. You can learn more information on
energy monitoring and analysis system from APsystems website