IB(5”,4”)RUNNING BOARD
1999-2013 SILVERADO 1500/2500/3500 REGULAR CAB
Page 1 of 4
10/21/15 (DP)
PARTS LIST:
Item QTY
Description
Item QTY
Description
#01
2 Running Board(use for left or right)
#09
4 10-1.50mm x 30mm Hex Bolts
#02
1 Driver/Left Front Mounting Bracket (DFM)
#10
6 10mm x 20mm OD x 2mm Flat Washers
#03
1 Driver/Left Front Support Bracket (DFS)
#11
4 10mm Lock Washers
#04
1 Passenger/Right Front Mounting Bracket(PFM)
#12
2 10mm Hex Nuts
#05
1 Passenger/Right Front Support Bracket(PFS)
#13
16 6-1.0mm x 20mm T-Bolts
#06
1 Driver/Left Rear Mounting Bracket(DRM)
#14
16 6mm x 22mm OD x 2mm Flat Washers
#07
1 Passenger/Right Rear Mounting Bracket(PRM)
#15
16 6mm Lock Nuts
#08
2 10mm Nut Plates
PROCEDURE:
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ FACTORY BODY
BOLT REMOVAL INSTRUCTIONS AND INSTALLATION INSTRUCTIONS CAREFULLY BEFORE
STARTING INSTALLATION.
1.
Start the installation under the passenger side of the vehicle. Remove the front body mount bolt,
(Figure 1)
. Do not remove rubber bushings.
2.
Attach the passenger side front mounting Bracket to the body mount reusing the factory hex bolt,
(Figures 2 & 3)
. Do not tighten hardware at this time.
(2) Running Board
(example only)
Front
(2) 10mm Nut Plates
Passenger/right Front
Mounting Bracket
Driver/left Front
Mounting Bracket
Passenger/right
Front Support Bracket
Driver/left Front
Support Bracket
Passenger/right
Rear Mounting
Bracket
Driver/left Rear
Mounting
Bracket