APS CFS108, Руководство по эксплуатации

Страница: 101 / 146

CFS100 SERIES OPERATION MANUAL
SECTION 7: REMOTE PROGRAMMING
Entire Contents Copyright

2016 by Adaptive Power Systems, Inc. (APS) • All Rights Reserved • No reproduction without written authorization from APS.
APS CFS100 Series Power Source Operation Manual Page 101 of 146
7.4 Test Control Command and Query Syntax
The following table lists all available remote control commands in alphabetical order. Each
command is described in more detail in subsequent sections.
Command Description Value Unit
TEST Execute a Test Power On
RESET Abort a test in Process or Reset
Failures
Power Off
TD? Testing meters data MEMORY,STEP,STATUS,FREQ,VOL
T,CURR,WATT,CURR
PEAK,PF,TIMER
RD? Results meters data MEMORY,STEP,STATUS,FREQ,VOL
T,CURR,WATT,CURR
PEAK,PF,TIMER
TDFREQ? Testing frequency meter 45.0~500.0 Hz
TDVOLT?
Testing voltage meter 0.0~300.0 V
TDCURR? Testing current meter 0.000~42.00 A
TDAP? Testing current peak meter 0.0~59.0 A
TDP? Testing power meter 0.0~5000 W
TDPF? Testing pf meter 0.000~1.000
TDTIMER? Testing timer meter 0.0~999.9 s/m/h
METER
{4|3|2|1|0}
Meter Selection 0=FREQ,1=AP,2=POWER,3=CURR,
4=PF
METER? Meter Selection Query 0=FREQ,1=AP,2=POWER,3=CU
RR,4=PF
SDTRG Trigger one time Surge/Drop
STEPCYCLE? Step Cycle Query 0 = Continuous, 1 = Off, 0-9999
MEMORYCYCLE? Memory Cycle Query 0 = Continuous, 1 = Off, 0-9999
LOOPCYCLE? Loop Cycle Query 0 = Continuous, 1 = Off, 0-9999
Table 7-1: Test Control Command and Query Summary