83
APROTECH GmbH
Rathsbergstrasse 17
90411 Nuremberg / Germany
Trade register:
Nuremberg HRB 23727
USt.-Id-No.: DE 256 058 089
D-U-N-S: 31-260-0530
phone: +49 911 / 65 00 79-50
fax:
+49 911 / 65 00 79-79
eMail: [email protected]
Web: www.aprotech.de
Managing Director:
Peter Jung
Industrial Panel- and Box-PCs
The system supports both Legacy and Unified Extensible Firmware Interface (UEFI) boot modes.
UEFI is a specification proposed by Intel to define a software interface between operating system
and platform firmware. Most modern operating systems, such as Windows 10 and Linux support
both Legacy and UEFI boot modes. The Legacy boot mode uses MBR partition for disk and VBIOS
for video initialization, the UEFI boot mode uses GPT partition which supports greater than 2TB
partition size and GOP driver for faster video initialization.
NOTE:
If you choose Legacy mode, you will not be able to create disk partitions greater than 2TB or use
TPM 2.0 function.
To configure Boot Type:
1. When system boots up, press
F2
to enter BIOS setup utility.
2. Go to
[Boot]>[Boot Type]
, press ENTER to bring up options, Dual Boot (UEFI),
Legacy Boot Type, UEFI Boot Type.
3. Highlight your selection and press
ENTER
.
4. Press
F10
to “Exit Saving Changes”.