Aprotech GOLUB 45 Series, Руководство пользователя, Страница: 80 / 105

80
APROTECH GmbH
Rathsbergstrasse 17
90411 Nuremberg / Germany
Trade register:
Nuremberg HRB 23727
USt.-Id-No.: DE 256 058 089
D-U-N-S: 31-260-0530
phone: +49 911 / 65 00 79-50
fax: +49 911 / 65 00 79-79
eMail: info@aprotech.de
Web: www.aprotech.de
Managing Director:
Peter Jung
Industrial Panel- and Box-PCs
4.10 Power On after Power Failure
This option defines the system’s behavior when DC power is supplied.
Value Description
S0 – Power On System is powered on when DC power is supplied.
S5 – Power Off System is kept in off state when DC power is supplied.
When you want to use the AT-mode remote on/ off control function, you have to set this
option to “S0 – Power On”. Please refer to the section “ Powering on the System ” for
instructions of using AT-mode remote on/off control function.
To set “Power On after Power Failure” option:
1. Press F2 when the system boots up to enter the BIOS setup utility.
2. Go to [Power]
3. Set the [Power On after Power Failure] option to the desired setting.
4. Once set, press
F10
to save setting and exit.