Aprotech GOLUB 45 Series, Руководство пользователя, Страница: 73 / 105

73
APROTECH GmbH
Rathsbergstrasse 17
90411 Nuremberg / Germany
Trade register:
Nuremberg HRB 23727
USt.-Id-No.: DE 256 058 089
D-U-N-S: 31-260-0530
phone: +49 911 / 65 00 79-50
fax: +49 911 / 65 00 79-79
eMail: info@aprotech.de
Web: www.aprotech.de
Managing Director:
Peter Jung
Industrial Panel- and Box-PCs
4.3 COM Port High Speed Mode
The high speed mode of each COM port effectively allows for the port's baud rate generator to
operate at 8x the speed with an effective baud rate of 921,600 bps (115,200 x 8). Please refer to
the following instructions on how to enable the high speed mode for your COM port (COM1 used
as an example).
To set COM port high speed mode:
1. Press F2 when the system boots up to enter the BIOS setup utility.
2. Go to [Advanced]

[Peripheral Configuration] .
3. Enable or set the [Set COM1 Mode as] option to the desired mode.
4. Highlight [HS Mode] and press ENTER to bring up options, highlight [Enable] and press
ENTER
.
5. Once set, press F10 to save setting and exit.