APRILIA mille SL, Руководство пользователя

Страница: 18 / 96

18 use and maintenance SL mille
-5,4)&5.#4)/. #/-054%2
When the ignition key (1) is rotated to posi-
tion “
n
”, the following warning lights come
on on the dashboard:
– red line warning light LED “
max ” (2).
– red engine oil pressure warning light
LED (
j
) (3), which remains on until the
engine starts.
The pointer (4) of the revolution counter
shifts to the maximum value (rpm) set by
the user. After about three seconds the red
line warning light LED “
max ” (2) goes off;
the pointer (4) of the revolution counter re-
turns to its initial position. In this way the
component operation is tested.
a
CAUTION
After the first 1000 km (625 mi) and suc-
cessively every 7500 km (4687 mi), the
writing “SERVICE” (5) appears on the
right display. In this case contact an
APRILIA
Official Dealer, who will carry
out the operations indicated in the regu-
lar service intervals chart, see p. 52-53
( R E G U L A R S E R V I C E I N T E R V A L S
CHART). To make the writing “SERV-
ICE” disappear, press the “LAP” push
button (6) and then the push button
R
and keep them pressed for about 5 sec-
onds.
With the ignition key (1) in position
“
n
”
the
standard settings on the dashboard are the
following:
Right display : Clock (7), coolant tempera-
ture in °C (8).
Left display : Instantaneous speed in km/h
(9), trip 1 (trip odometer) (10), total kilome-
tres/miles odometer (11).
Upon installation of the battery or of the
30A main fuses:
– The revolution counter pointer (4) makes
12 clockwise clicks, thus checking the
operation of the revolution counter itself.
– The instantaneous, maximum and aver-
age speed function is set in “ km/h ”.
– The coolant temperature is set in °C.
– The digital clock is set to zero.
– The red line is set at 6000 rpm, indicated
by the coming on of the red line warning
light LED “
max ” (red) (2).
NOTE
If necessary, carry out the appro-
priate adjustments.
SEGMENT OPERATION CHECK
◆
Press the push buttons
A
and
B
at the
same time.
◆
Rotate the ignition key (1) from position
“
m
” to position “
n
”.
All the segments will remain on until the
push buttons
A
and
B
are released.
SWITCHING FROM km TO mi (from
km/h to MPH) AND VICEVERSA (LEFT
DISPLAY)
◆
Press the push button
A
until, after
about 5 seconds, all the writings (12) on
the left display start blinking.
◆
Release the push button
A
.