manualshive.com logo in svg

APRILIA Mana GT ABS 2012, Руководство пользователя

Поделиться
Скачать
APRILIA Mana GT ABS 2012 Скачать руководство пользователя страница 84

NOTE

USE TOP QUALITY 5W - 40 OIL.

•

Top-up the oil in the reservoir until you reach the correct level.

•

Pour oil in small quantities and wait until it distributes in the engine.

•

Start the engine for some minutes.

•

Shut off the engine and wait some minutes before checking the level on the
sight glass (2) of the right crankcase.

•

The oil should reach the "MAX oil level" reference mark on the specific sight
glass (2) on the right crankcase.

Engine oil change (04_06, 04_07, 04_08, 04_09)

CHANGING ENGINE OIL AND ENGINE OIL FILTER CAN PROVE DIFFICULT IF
YOUR ARE INEXPERIENCED.

CONTACT AN OFFICIAL APRILIA DEALER IF REQUIRED.

IF YOU WISH TO PERFORM THESE OPERATIONS YOURSELF, FOLLOW THESE
INSTRUCTIONS.

Check the engine oil level frequently.

To change the oil:

84

4 Maintenance

Содержание Mana GT ABS 2012





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды