manualshive.com logo in svg

APRILIA Habana 125, Руководство пользователя

Поделиться
Скачать
APRILIA Habana 125 Скачать руководство пользователя страница 26

26

use and maintenance  Habana 50/125 - Habana Custom 50/125

,5"2)#!.43

a

WARNING

Oil can cause serious damage to the
skin if handled every day and for long
periods.
Wash your hands carefully after using
oil.

In case any maintenance operation has
to be carried out, it is advisable to use
latex gloves.

KEEP AWAY FROM CHILDREN. 

DO NOT DISPOSE OF OIL IN THE ENVI-
RONMENT.

a

CAUTION

Proceed with care.
Do not spill the oil!
Take care not to smear any component,
the area in which you are working and
the surrounding area. 
Carefully remove any trace of oil.

In case of leakages or malfunctions,
contact an 

APRILIA

 Official Dealer.

w

 

v

 2 STROKE OIL 

Top up the 2 stroke oil tank every 500 km
(312 mi).

The vehicle is provided with a separate
mixer that makes it possible to mix petrol
with oil for the lubrication of the engine, see
p. 86 (LUBRIFICANT CHART 

w

 

v

).

The reserve is indicated by the coming on
of the 2 stroke oil reserve warning light
“

j

” positioned on the dashboard, see p.

16 and 17 (ARRANGEMENT OF THE
CONTROLS / INSTRUMENTS AND INDI-
CATORS).

a

CAUTION

The use of the vehicle without 2 stroke
oil causes serious damages to the en-
gine.

If you run out of oil in the 2 stroke oil
tank or if the mixer oil pipe has been re-
moved, it is necessary to contact an

APRILIA

 Official Dealer, who will provide

for bleeding the system.

This operation is indispensable, since
the operation of the engine with air in
the mixer oil system may cause serious
damages to the engine itself.

To top up the 2 stroke oil tank, proceed
as follows:

◆

Lift the saddle, see p. 23 (UNLOCKING /
LOCKING THE SADDLE).

◆

Remove the plug (1).

2 STROKE OIL TANK CAPACITY: 1.4 

L

TANK RESERVE: 0.4 

L

◆

Top up the 2 stroke oil tank.

a

CAUTION

After refuelling, put back the cap (1) in
the correct position.

◆

Put back the cap (1).

Содержание Habana 125









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды