manualshive.com logo in svg

APRILIA DORSODURO 1200 2010, Руководство пользователя, Страница: 100 / 136

Поделиться
Скачать
APRILIA DORSODURO 1200 2010 Скачать руководство пользователя страница 100

Electric Current - 10 A

Time - 0.5 hours

Long periods of inactivity

IF THE VEHICLE IS OUT OF USE FOR MORE THAN TWENTY DAYS, DISCON-
NECT THE 30 A FUSE TO PREVENT BATTERY DETERIORATION CAUSED BY
CURRENT CONSUMPTION BY THE MULTIFUNCTION COMPUTER.

CAUTION

REMOVING THE 30 A FUSES RESETS THESE FUNCTIONS: DIGITAL CLOCK,
TRIP INFORMATION AND CHRONOMETER TIMES.

If the vehicle is inactive longer than fifteen days, it is necessary to recharge the battery
to avoid sulphation.

•

Remove the battery.

In winter or when the vehicle is out of use for prolonged periods, check charge level
frequently (about once a month) to prevent deterioration.

•

Recharge it fully with an ordinary charge.

If the battery is still on the vehicle, disconnect the cables from the terminals.

NOTE

THE FIRST TIME THE ENGINE IS STARTED AFTER RECONNECTING THE BAT-
TERY LEADS, WAIT 20 SECONDS BETWEEN THE MOMENT THE KEY IS SET
TO "KEY ON" AND THE MOMENT THE STARTER BUTTON CAN BE PUSHED.

100

4 Maintenance

Содержание DORSODURO 1200 2010









































































































































Отзывы:

Нет отзывов