SPECIFICATIONS
Airflow:
20-160 CFM
Filter:
MERV 6 washable
3 1/8"
2 7/16"
13 1/16"
15 3/4"
18 1/8"
10 1/4"
10 3/4"
10 1/4"
90-2312
FIGURE 1
– DIMENSIONS (INCHES)
9" MIN
CLEARANCE FOR FILTER
FILTER
WIRING ACCESS
OPENING – BOTH
SIDES OF HOUSING
90-2313
FIGURE 2
– LOCATION CLEARANCES
MOUNT THE VENTILATOR
CAUTION
1.
Mount the blower with the lowest, exposed moving parts at least 8
feet (2.4 m) above floor or grade level.
2.
Mount the blower at least 3.3 feet (1.0 m) from an accessible
opening of the duct.
The ventilator can be mounted in any orientation. Avoid locations that
block wiring access openings in the housing and ensure that location allows
sufficient clearance for filter maintenance and service. See
FIGURE 2
.
1.
Install the mounting brackets in the designated holes in the housing
using the supplied #8 x 1/2" screws.
CAUTION
Screwing the brackets or any other hardware into any other
location but the designated mount location may cause damage and
invalidate the warranty.
2.
Secure the unit to joists or a strong platform (do not install directly to
drywall only as the ventilator weighs approximately 20 pounds) using
the #10 x 3/4" screws provided.
English
3
