Appro VS-2401 Скачать руководство пользователя страница 6

Страница: 6 / 100

1. PRODUCT FEATURES

1.1 Product Instructions

The Video Server Encoder is a versatile solution that allows you to make the most of your existing

analog surveillance infrastructure. The Video Server is a standalone system with a built-in video

encoder that converts an analog camera into a full-featured IP-based system. The Video Server

can be remotely accessed and controlled using a Web browser over an Intranet or the Internet.

The Video Server’s Video Encoder makes it possible to integrate a pre-existing analog

surveillance infrastructure into a fully-functional IP surveillance system. The Video Server is an

ideal choice for banks, airports, factories, government buildings, prisons, and traffic surveillance

applications - any location where surveillance equipment is already installed and functioning.

This video server adapts Texas Instrument's (TI's) newest digital media processor -- the

TMS320DM 365 for efficient image operation, while also offering simultaneous triple-codec

( H.264 / MPEG-4 / MJPEG ) video compressions with the highest resolution of Full D1, at 30 / 25

frames per second in the NTSC / PAL systems, respectively. In addition, users based on different

bandwidths can choose multi-profile video streaming at different resolutions.

The video server provides stable, reliable and convenient network surveillance. It safely

downloads automatic video codec and other components, and lets you set up the control

settings very easily. It provides UPnP features as well. Its USB interface is for basic network

setting and updating. The SD card slot supports alarm and event recording and updating.

Furthermore, this encoder board comes with the Power over Ethernet (PoE) function, and its

RS-485 interface can be connected with all kinds of Pelco-D PTZ cameras.

Alarm handling features provide alerts in the event of loss of video or loss of network connection.

Motion alarms with configurable detection areas allow for effective surveillance and help to

mitigate the need for constant human supervision. A buffer system allows the server to capture

images to the built-in SD card slot before and after an event occurs.

We have launched this triple-codec video server for the more advanced digital surveillance

solutions demanded by our clients. We believe this unit is the right answer to your Network

surveillance problems. You will find it practical, precise and indispensable.

Содержание VS-2401





































































































Результаты поиска

Содержание VS-2401

Отзывы:

Appro VS-2401, Руководство по установке и эксплуатации, Страница: 6 / 100

Результаты поиска

Содержание VS-2401

Отзывы: