Applied Precision WS 2120, Руководство пользователя

Страница: 12 / 106

Working Standard
User’s Guide
WS-UGFW619-EN
www.appliedp.com 12
3.4 Top Connectors
Figure 9
– Top side connectors
1
In A
Signal Input A
- main signal (voltage or current) input connector
2 In B
Signal Input B
- main signal (voltage or current) input connector
3
Aux
Auxiliary (AUX) Input / Output connector
4 -
Auxiliary Lighting LED
- white LED of auxiliary lighting controlled by SHIFT key
Accessories connectable into Auxiliary (AUX) Input / Output connector:
•
Optical Sensor
•
Impulse Input Base (for connection of Snap Switch or Impulse SO cable)
•
Frequency Output with BNC adapter
Accessories connectable into Signal Input A or Signal Input B:
•
Voltage Transducer VT 2x60 (max. voltage 600 V)
•
Voltage Transducer VT 3x30 (max. voltage 500 V)
•
Current Transducer CT 3x20 (max. current 20 A)
•
Current Clamps CC 2x12 (max. current 120 A)
•
Current Clamps CC 3x24 (max. current 240 A)
•
Flexible Current Probe FCP (max. current 6000 A)
Remarks:
Signal Input A and Signal Input B are fully interchangeable and both can be used for connection of any
of above listed accessories. It is also possible to connect same type of accessories in both signal inputs.
1 2 3 4