Applied Biosystems GeneAmp PCR System 9700, Руководство пользователя

Страница: 68 / 132

4-12 Running PCR Samples
When a Run Completes
End of Run Screen
At completion of a run, the instrument beeps and the End of Run screen appears.
From the End of Run screen you can perform the same functions as you can from the
Stop Run screen.
If you have not yet stored the method, you must store it before exiting, or you will lose
the settings. The Store soft key appears if the method has not yet been stored.
Method Not Stored
Screen
If you attempt to exit the End of Run screen before storing the method, the Method Not
Stored screen displays.
The following table lists the actions you can take.
11:30 AM 25.1°C
Method: XL PCR
Run completed at 11:30:05 AM, 01/01/00.
Length of run is 01:34:25.
End of Run
F1 F3 F4 F5 F2
Hist
Exit
If you... Then press...
want to store the method
Store
.
do not want to store the method
Exit
.
Note The
Method Not Stored
screen appears for a few
seconds before the Exit key is recognized. This prevents
you from losing a newly created method.
You return to the top level screen and the method you
created is not saved.
Method Not Stored
Press Store to save the method.
Press Exit to delete the method.
F1 F3 F4 F5 F2
Exit Store