Applied Biosystems 3500 Скачать руководство пользователя страница 78

Страница: 78 / 326

In the Assign Plate Contents screen, click Export.

Note:

Before you click Export, you can assign other plate elements to the plate

import template as described in “Assign plate contents“ on page 44.

Select a file type for the plate import template.

Enter a name and location for the plate record template.

Click Save.
The figure below shows the format of the exported plate.

Open a plate import template (see “Create a plate import template“ on page 77.

Save the plate import template under a new name.

Enter sample names (required).

(Optional) Enter information for the remaining columns. Note: If you specify

assay, results group, or file name convention names, the names you enter must

exactly match the names of existing items in the library.

IMPORTANT!

If you copy/paste sample or plate information into the Assign

Plate Contents screen or into a plate import file, copy from a plain text editor

such as Notepad. Do not copy from a word processing program such as

Microsoft

™

Word

™

, which may include invisible, non-ASCII characters. Non-

ASCII characters in plate or sample information may cause a run to stop or may

prevent a run from starting.

Save the plate import file.

Create a plate

import file

Chapter 3

Set up and run

Содержание 3500







































































































































































































































































































































Результаты поиска

Содержание 3500

Отзывы:

Applied Biosystems 3500, Руководство пользователя, Страница: 78 / 326

Результаты поиска

Содержание 3500

Отзывы: