Applied Biosystems 3500 Скачать руководство пользователя страница 193

Страница: 193 / 326

Set account setup and security policies

Security policies apply to all user accounts.

Under Account Setup, specify user name limits.

IMPORTANT!

The software allows spaces in user names (Define name spacing).

Use spaces in user names with caution. For information, see “Spaces in user

names“ on page 194.

Specify the allowed characters in user names: spaces and alpha, numeric, upper/

lower case, and special characters (@, commas, periods, semicolons, dashes,

underscores, and tildes).

Specify password limits and whether users can paste copied text into the

password field.

Specify the required characters in passwords: spaces and alpha, numeric, upper/

lower case, and special characters (any non-space, non-alpha, or non-numeric

characters).

Specify password reuse. You cannot disable the password reuse restriction.

Note:

Do not disable the Account Suspension feature.

Click Setup Messaging Notification to specify when and how to notify the

administrator of certain security events. For information, see “Set up messaging

notifications“ on page 194.

Click Save Settings.
The new settings are applied to the logged-in user the next time the user logs in.

Chapter 8

Use Security, Audit, and E-Sig functions (SAE Module)

Administrators

3500/3500xL Genetic Analyzer User Guide—Data Collection Software v3.1

193

Содержание 3500







































































































































































































































































































































Результаты поиска

Содержание 3500

Отзывы:

Похожие инструкции для 3500

Бренды по названию

Популярные бренды

Applied Biosystems 3500, Руководство пользователя

Результаты поиска

Содержание 3500

Отзывы:

Похожие инструкции для 3500

Бренды по названию

Популярные бренды