Applied Biosystems 3500 Скачать руководство пользователя страница 17

Страница: 17 / 326

Instrument front panel indicators

Indicator

Status

All lights off

Instrument off

Green light

Idle

Green light (blinking) Run is in progress

Note:

You can only abort an injection when the green light is flashing, not when it is solid

green.

Amber light (blinking) Power-up self-test is in progress

Instrument has paused. If the door is open, close it. If the amber light is still blinking, restart

the software, then repeat the run.

Amber light

Standby

Red light

Self-test failed or instrument failure. Restart the instrument and computer (see “Restart the

instrument and the computer“ on page 251).

Instrument and computer requirements

IMPORTANT!

Do not modify the instrument hardware or software without notifying

Thermo Fisher Scientific. Any modifications must be made by Thermo Fisher

Scientific under change control.

For minimum computer requirements, see “Instrument specifications“ on page 286.

The computer provided with the instrument contains validated software and settings.
Do not update the Windows

™

operating system or firewall settings.

The computer provided with the instrument does not include antivirus software

because customer preferences and network requirements vary.
We recommend Norton Antivirus, which has been tested and approved for use with

the Applied Biosystems

™

3500/3500xL Genetic Analyzer with 3500 Series Data

Collection Software 3.1.

CAUTION!

Do not install additional software on the computer other than

antivirus software. Changes to the configured software could void the

instrument warranty and cause the instrument software to be non-operational.

IMPORTANT!

Do not rename the computer after the 3500 Series Data Collection

Software 3.1 is installed. The instrument computer has been assigned a unique name.

Changing the name may cause the 3500 Series Data Collection Software 3.1 to

malfunction.

Windows

™

software

requirements

Antivirus software

requirements

Other software

Chapter 1

Instrument and software description

Instrument and computer requirements

3500/3500xL Genetic Analyzer User Guide—Data Collection Software v3.1

Содержание 3500







































































































































































































































































































































Результаты поиска

Содержание 3500

Отзывы:

Похожие инструкции для 3500

Бренды по названию

Популярные бренды

Applied Biosystems 3500, Руководство пользователя

Результаты поиска

Содержание 3500

Отзывы:

Похожие инструкции для 3500

Бренды по названию

Популярные бренды