Applent Instruments AT525D, Руководство пользователя

Страница: 33 / 41

Command Reference
33
measurement range, monitors parameter control.
Figure 8-3 FUNCtion Subsystem Tree
FUNCtion :RANGe
{#Range Number
，
max
，
min}
:MODE {AUTO,HOLD,NOMinal}
:RATE {SLOW,MED,FAST,ULTRA}
8.7.1 FUNCtion:RANGe
The FUNCtion:RANGe command sets the range.
Command
Syntax
FUNC:RANGe < 0-4,MIN,MAX >
Parameter Where, <0-3,MIN, MAX> is:
0-4, The range number
MIN, =Range 0
MAX, =Range 3
Example SEND> FUNC:RANG 2
<NL>
//Set range to [2] 300mΩ
Query
Syntax
FUNC:RANGe?
Query
Response
<0-3>
<NL>
Example SEND> FUNC:RANG?
<NL>
RET> 0
<NL>
8.7.2 FUNCtion:RANGe:MODE
The FUNCtion:RANGe:MODE command sets the range mode.
Command
Syntax
FUNCtion:RANGe:MODE {HOLD, AUTO, NOMinal}
Parameter Where, {HOLD, AUTO, NOMinal} is:
HOLD:
Sets the auto range to off.
AUTO: Sets the auto range to on.
NOMinal: Sets the range mode to nominal.
Example SEND> FUNC:RANG:MODE AUTO
<NL>
//Sets to auto range.
Query
Syntax
FUNC:RANGe:AUTO?
Query
Response
{HOLD,AUTO,NOM}
Example SEND> FUNC:RANG:MODE?
<NL>
RET> auto
<NL>
8.7.3 FUNCtion:RATE
The FUNCtion:RATE command sets the test speed.
Command
Syntax
FUNCtion:RATE {SLOW,MED,FAST,ULTRa,ULTRaNodisp(ULTN)}
Example SEND> FUNC:RATE FAST
<NL>
//Sets to FAST Speed
Query
Syntax
FUNC:RATE?
Query
Response
{SLOW,MED,FAST,ULTR,ULTN}